Manual Station Tuning; Filter Function; Switching The Filter Function On/Off - Becker CASCADE PRO Operation Manual

Radio mode

Manual station tuning

You can set the required frequency
manually.
In the status display, press the rotary
!
control/push button until
- Frequency +
or appears on the display
instead of the previous/next station.
3005
! Turn the rotary control/push button
to select the required frequency.
To exit manual station tuning, press and
hold down the rotary control/push
button until Frequency -
+ disappears.
The selected frequency remains set.
Note:
Press or to initiate the
search for the next receivable station.
Pressing and holding button
results in a fast frequency search
until the button is released.
68

Filter function

You can use this function to filter
stations or entire station chains out of the
station list.
Frequency
In the Radio main menu, select
!
3006
The Filter menu appears.
Turn the rotary control/push button
!
to select one of the following options:
Filter ,
Reset
or
the stations and station chains which
or Frequency
can currently be received.
or

Switching the filter function on/off

! In the Filter menu, select the
entry.
Turn the rotary control/push button
!
to switch the function on ( ) or off
( ).
Filter .
If the function is active ( ), only the
stations and station chains which have
not been filtered out will appear in the
FM station lists.
Note:
If the function is not active, the filter
settings will continue to be maintained.
Filter