•
Car
This is the default setting. It offers
sufficiently accurate calculation of the
ETA for most drivers.
Van
•
This setting indicates to the Cascade
that you will need a little longer for the
planned route. This setting could be
selected, for example, for a slower
vehicle or in dense traffic areas.
Set freely
•
Select this option to modify the calcu-
lation of the ETA to suit your require-
ments.
Note:
Only one of the two settings may be
active ( ) at the same time.
!
Turn the rotary control/push button
to activate the required setting ( ).
If
Set freely
is selected, you still need to
select the required setting. The available
range is between 50% and 200%.
A value of 100% indicates the
ting. A later ETA will be calculated if a
higher percentage value is selected.
2093
Turn the rotary control/push button
!
to set the required percentage value.
!
Confirm your selection by pressing
the rotary control/push button
Navigation mode
Measuring unit
You can convert the calculation of the
distances from metric (display in metres
Car
set-
and kilometres) to imperial (display in
yards and miles) system and vice versa.
In the Settings menu, select the
!
measure
entry.
2094
Confirm your selection by pressing
!
.
the rotary control/push button
2095
Select
Metric
or
!
Note:
Only one of the two settings may be
active ( ).
Unit of
.
Imperial
(on =
).
63