Calling Up The System Settings - Becker CASCADE PRO Operation Manual

For Display :
• Setting display brightness with
brightness
• Setting display colour using
• You can use Day/night design
ure the settings for changeover be-
tween day and night design.
Other settings:
• Using External device , you can specify
whether an AUX source or an external
hands-free unit is connected to the
Cascade instead of a CD changer.
• You can use Reset functions
Cascade to the factory settings.
• You can use Data backup to backup the
address book data or load previously
saved data back onto your Cascade.
• You can use Direction of rotary actuator
to specify the direction in which lists
and menus are scrolled when the
rotary control/push button is turned.
• You can use
GMT time sent by the satellite in
Display
terms of its format and the current
time zone.
Colours
.
The time only needs to be set so that
to config-
the Cascade can supply navigation
information correctly on routes with
time-dependent route guidance. Set-
ting the time also ensures that antici-
pated times of arrival are announced/
displayed correctly.
to reset the
Clock to configure the

Calling up the system settings

!
!
7014
!
7015
!
!
Settings
Press .
Turn the rotary control/push button
counter clockwise until
setting appears at the top right of the
display.
Press the rotary control/push button
.
Turn the rotary control/push button
to select one of the following options:
Audio ,
External device ,
Display
,
Reset functions ,
Data backup ,
Direction of rotary actuator or
Clock
Confirm your selection by pressing
the rotary control/push button
System
.
185