Toggling; Conference Call; Creating A Conference - Becker CASCADE PRO Operation Manual

5079
Turn the rotary control/push button
!
to select one of the following op-
tions:
Dial number ,
Select from rapid access or
Call from address book .
With these menu items you can enter or
select a telephone number and start a call
to the phone number dialled.
If the call has been established, this call
is active.
You can then switch between these two
calls as described in "Toggling" on
page 115 or combine the two calls into a
conference call as described in "Confer-
ence call" on page 115.

Toggling

(internal phone and SIM-Access only)
With the čoggle function you can switch
between an active call or conference call
and a call or conference call on hold.
A prerequisite for toggling is that you
have an active call or conference call
and have put a call or a conference call
on hold.
! By pressing or
call/conference call on hold.
or
Turn the rotary control/push button
!
to select the call/conference call
on hold (Options menu must not be ac-
tivated).
! Press the rotary control/ push button
.
The Options menu appears.
Then select the Activate entry.
!
The call on hold is activated.

Conference call

(internal phone and SIM-Access only)
A conference call is a call that you have
created with up to a maximum of 6 par-
ties. The parties are able to hear each
other.
You can add other parties to a confer-
ence call, conduct a private conversation
with parties or end the connection to one
of the parties in the conference call.
The conference call function is not sup-
select the ported by all providers.

Creating a conference

You have already established an active
call with one party and now want to add
another party.
! In the status display, press the rotary
control/push button
The Options menu appears.
Then select the
!
Establish a connection to the desired
!
participant.
Telephone mode
.
Dial entry.
115