Press the
button and then the multifunction button
Use the right rotary control
Press the
button and then the multifunction button
Set the desired balance level using the right rotary control
Briefly press the
button.
82
for the desired fader setting.
Press the multifunction button
.
played. By pressing the multifunction button
tone settings for the currently selected signal source (e.g. FM)
are set to an average value.
Press the
button and then the multifunction button
.
Using the multifunction button
loudness on (
) or loudness off (
Loudness is switched off in MW, LW and SW wavebands.
.
Press the multifunction button
Use the right rotary control
volume level.
-
is dis-
again the
you can select either
).
.
to set the desired subwoofer
.