Always Allow Connection; Name Device; Deleting A Device From The List - Becker CASCADE PRO Operation Manual

Settings

Always allow connection

When this function is activated the
corresponding external device can
establish a connection to the Cascade
without you authorising it.
! In the device list, select the device for
which the "Always allow connection"
setting is to be changed.
! Press the rotary control/push button
and hold until the following menu
appears.
7032
Select the Always allow connection
!
Press the rotary control/push button
!
to switch the function on ( ) or
off ( ).
172

Name device

You can change the name of a device
displayed in the Bluetooth device list.
Select the device to be named from the
!
device list.
! Press the rotary control/push button
and hold until the following menu
appears.
7033
! Select the Name device
entry.
7034
! Enter the desired name. For this
purpose, proceed as described in
"Data entry menus" auf Seite 13.
The changed name will be shown in the
device list.

Deleting a device from the list

You can delete devices from the
Bluetooth device list which are not used
or which are outdated.
! Select the device to be deleted from
the device list.
! Press the rotary control/push button
and hold until the following menu
appears.
7035
entry.
! Select the
When the next prompt appears, select
!
Yes to delete the entry or
The device will be deleted or retained on
the basis of the selection.
Note:
A connected device is indicated in the
list in grey and can only be deleted after
the connection has been terminated.
Delete from list entry.
No to retain it.