Radio Mode; Switching On Radio Mode; Calling Up The Radio Main Menu - Becker CASCADE PRO Operation Manual

Radio mode

Switching on radio mode

Radio mode
! Press .
Radio mode is activated. The last wave-
band selected and the last station selected
are set.
Calling up the Radio main
menu
You can make settings for radio mode in
the Radio main menu.
The following description assumes that
you are in the status display.
! Press twice in succession.
or
Press .
!
The Fast Access menu appears.
Radio menu
! Select the entry.
3001
64
The Radio main menu appears.
The example shows the Radio main
menu for VHF.
Turn the rotary control/push button
!
to select one of the following options:
Waveband
,
Programme type
,
Filter ,
čraffic info ,
Sound ,
Voice entries ,
Regionalisation ,
Reception optimisation or
Adaptive bandwidth control
! Confirm your selection by pressing
the rotary control/push button
The required function is called up.
• Waveband
Accesses the selection menu for the
waveband. See "Selecting a wave-
band" on page 65.
• Programme type
Accesses the selection menu for the
programme type. See "Programme
type" on page 70.
Filter
•
Accesses the selection menu for the
filter function. See "Filter function"
on page 68.
• čraffic info
Accesses the selection menu for traffic
programmes. See "Traffic programme"
on page 73.
• Sound
Accesses the sound settings. See
"Sound settings" on page 18.
.
• Voice entries
Accesses the selection menu for voice
entries. See "Voice entries" on
page 72.
• Regionalisation
You can switch regionalisation on/off.
See "Regionalisation" on page 71.