Becker CASCADE PRO Operation Manual page 106

Telephone mode
Query status option
You can use this function to request the
current settings for the call divert func-
tion.
After selecting Query status , after a mo-
ment a message appears with the status
of the call divert function, provided a re-
quest is possible. Here you can see
whether the individual call diversions
are switched on or off and the particular
numbers to which calls may be diverted.
Divert all calls
option
You can use this function to specify that
all calls are diverted to a specific phone
number.
Note:
If the call divert function Divert all calls
is active, all the other call diverts are ig-
nored.
After selecting Divert all calls
appears in which you can switch the call
divert function on/off or request the sta-
tus.
5065
106
! Select from
The Off option deactivates the call divert
function.
Status
The option shows the current sta-
tus of the call divert function.
After selecting
displayed, provided a call divert number
has already been entered.
5066
Select from
!
Cancel .
By selecting
is activated. Calls are then diverted to
the phone number displayed.
, a message
On , Off and Status .
On , the phone number is
Use , Another number and
Use the call divert function
By choosing Another number , you have the
option of selecting or entering another
phone number.
5067
Turn the rotary control/push button
!
to select one of the following op-
tions:
Show last number ,
Call from address book
or
Enter number .
! Confirm your selection by pressing
the rotary control/ push button
• Show last number
This displays a list of the 4 phone
numbers used last for the call divert
function. Select the desired phone
number here.
• Call from address book
You can select a phone number for the
call divert function from the address
book.
.