Displaying/Storing Position; Displaying Traffic Announcements - Becker CASCADE PRO Operation Manual

Navigation mode

Displaying/Storing position

! Press .
! Turn the rotary control/push button
clockwise until Position appears on the
top right of the display.
2077
The following information appears:
• If possible, the town and road/geo-
graphical coordinates and height above
sea level (only in the event of sufficient
satellite reception) appear on the left-
hand side of the display.
• The number of satellites which have
been/can be received appears above
the image of the car.
56
! Press the rotary control/push button
to store the current position.
2078
The current position was saved in fast
access mode.
Displaying traffic
announcements
Press .
!
Turn the rotary control/push button
!
čMC
clockwise until
the top right of the display.
2079
The following information appears:
• The number of TMC messages
received.
• The number of TMC messages rele-
vant to the route.
! Press the rotary control/push button
.
2069
All TMC messages are displayed.
To listen to all announcements, select
!
the Read out all messages
or
Select the required announcement.
!
! Confirm your selection by pressing
the rotary control/push button
The announcement appears in full.
appears on
For more information about traffic
announcements, see "Displaying traffic
information" on page 59.
entry.
.