Becker CASCADE PRO Operation Manual page 174

Settings
7037
! Select Handsfree to connect the mobile
phone via the hands-free profile or
SIM-Access to connect via the SIM-Ac-
cess profile.
Note:
The device to be connected is addressed
by Cascade and signals which profiles
are supported by the device. Depending
on the message received back, the
Access
option may not be available. In
some devices, no message is sent back
but the SIM-Access option is still availa-
ble. It may be the case, however, that a
connection cannot be established.
Further operation differs depending on
the selection.
174
Hands-free profile
If Handsfree is selected, the Cascade
attempts to establish a hands-free profile
connection to the desired device.
You may be required to enter a password
depending on which device you are
trying to connect.
Note:
You will find further information on
this in the instructions for the device
which you are trying to connect.
For some devices a fixed password has
SIM-
been specified by the manufacturer.
Enter this password. With other devices
you can choose a number code with 1 -
16 digits. This code must be entered in
the Cascade and the device to be
connected.
7038
! Enter the password by rotating/
pressing the rotary control/push
button .
Select the symbol from the
!
input menu.
or
press the rotary control/push button
!
and hold for at least 2 seconds.
A connection will be established to the
required device. The device has now
been now authenticated.
If it was not possible to establish a
connection, the Cascade will notify you
of this on the display.
Note:
If a different device was already
connected, this will be disconnected.