Becker Traffic Pro 4720 Operating Manual
  1. Manuals
  2. Brands
  3. Becker Manuals
  4. Car Stereo System
  5. Traffic Pro 4720
  6. Operating manual

Becker Traffic Pro 4720 Operating Manual

Hide thumbs Also See for Traffic Pro 4720:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
G
75

Advertisement

Table of Contents
loading

Related Manuals for Becker Traffic Pro 4720

Summary of Contents for Becker Traffic Pro 4720

  • Page 2: Table Of Contents

    ‚‡r‡† Route guidance calculation Stopover Traffic jam function Cancelling route guidance Entering the code number Notes on route guidance Removing the portable panel Dynamic navigation with TMC Inserting portable panel Information during route guidance Destination memory Switch on / off Special destinations Adjusting the volume Points of interest (P.O.I.) CD...
  • Page 3 Regionalisation Naming a CD Switching regionalisation on/off CD filter function Switching frequency display on / off Switching radio text display on / off Requesting/quitting user menu Traffic Programme (TP) GAL setting (Gal) Activating/quitting the TP menu Telephone mute characteristics (Tel) Switching TP on/off Display colour setting (Col) Selecting automatic tracking...
  • Page 4 6……htr€r‡Ã‚sÃp‚‡…‚y† 1 Left rotary control (Info) 6 Select radio mode ( 2 On / off switch ( 7 Select navigation mode ( 3 Tone button ( 8 CD eject button ( 4 Traffic programme button ( 9 Right rotary control (Ok) 10 Multifunction buttons 5 Select CD mode (...

  • Page 5: Entering Code Number

    6‡v‡urs‡Ã†’†‡r€ If an incorrect code number is entered, the prompt displayed again. After entering an incorrect code three times If the car radio is disconnected from the power supply, it is is displayed and the unit is disabled for approx. theft-protected upon reconnection.
  • Page 6 As an effective anti-theft device, the portable panel ( ) can be Insert the portable panel in the lower left catch and then en- removed from the unit. gage it in the lower right catch. Then fold up the portable pan- el and engage it in the upper catches.

  • Page 7: Fader

    Brr…hyƒr…h‡v‚ Settings for the bass, treble, fader, balance and loudness are stored separately for wavebands MW, LW, SW, FM, for traf- Press button. fic announcements, navigation messages, telephone opera- Additional options for switching on / off: Via ignition. In or- tion, CD and CDC/AUX operation.
  • Page 8 Press the multifunction button is dis- Press the button and then the multifunction button played. By pressing the multifunction button again the tone settings for the currently selected signal source (e.g. FM) are set to an average value. Press the button and then the multifunction button Use the right rotary control for the desired fader setting.
  • Page 9 Traffic guidance is restricted to passenger vehicles. Spe- tools. cial driving recommendations and regulations for other With the Becker TrafficPro, the location is determined via the vehicles (e.g. commercial vehicles) are not taken into ac- GPS receiver (GPS = Global Positioning System). The direc- count.
  • Page 10 • The route is recalculated by the system if deviation from the route is made. • During navigation mode, radio or CD can still be heard. • Press the left rotary control to hear the current naviga- The distance to the next announcement and, depending on tion announcement.
  • Page 11 Press multifunction button. Selection from The main navigation menu appears after this display. The navigation CD must be loaded when starting navigation operation for the first time. can be made by turning the right rotary control , and con- If the navigation system has not yet been calibrat- firmed by pressing the right rotary control ed, a calibration journey is prompted (see Installa- •...
  • Page 12 • A list of the last 50 destinations is displayed. The desired Select in the main navigation menu using the destination can be selected using the right rotary right rotary control and press to confirm. control . Before confirming with the right rotary control , details of the destination can be requested by pressing the left rotary control...
  • Page 13 Letters which are already entered are displayed inversely. For The last location entered is displayed. the purpose of support, the existing entry is displayed at the If you want to enter a destination in the displayed location, next place-name to be reached. The unit offers only the pos- you can select immediately.
  • Page 14 The destination can also be selected via the town’s post code. The place nearest to the entry appears in capital letters in the place selection list. The scroll marks indicate that more places are available for Select the destination’s by turning the right ro- selection in alphabetical order.
  • Page 15 The complete entry is deleted if the multifunction button Select the required location using the right rotary control is pressed for more than 2 seconds. and press to confirm. If more than 20 locations share the same post code, the dis- play will show the location input menu instead of the above- mentioned list.
  • Page 16 The road nearest to the entry appears in capital letters in the road selection list. The scroll marks indicate that more roads are available for se- lection in alphabetical order. Select the road by turning the right rotary control and press to confirm.
  • Page 17 If the complete centre-name was previously entered or was Using the multifunction button the last confirmed let- automatically completed, the program switches to route ter is deleted. menu. The complete entry is deleted if the multifunction button The program switches to the centre list if the selection is am- is pressed for more than 2 seconds.
  • Page 18 • An intersecting road can be defined as the destination here. This function is only available if this information is stored on the navigation CD. • Selection from Specifications such as quick route, short route, dynamic route, motorway, ferries and toll roads can be selected here.
  • Page 19 Select to jump to the destination mem- ory menu. Using the right rotary control , select Select to access the possible route set- in the route menu and press to confirm. tings. Select by turning the right rotary control and press to con- firm the selection.
  • Page 20 Further information under “Dynamic navigation with TMC” on page 101. • It is not absolutely necessary to store a destination in the des- Provides options for avoiding motorways, ferries or toll tination memory for route guidance. It saves repeated manual roads.
  • Page 21 For final storage in the destination memory, either route guid- ance must be started or the program must be switched to new The message "Calculating route" indicates that the distance is destination entry by selection of being calculated, which may take several seconds. After the first route guidance announcement, the prompt flashes on the display until the route has been completely cal- Select destination memory (see page 107).
  • Page 22 • (see page 86) allows entry of a stopover with the precise This function enables a stopover to be entered when route specification of the address. guidance is active. • (see page 107) enables the selection of special destina- tions as stopovers via , e.g.
  • Page 23 This function allows you to block the approaching route sec- tions as from the next junction and calculate a bypass route when a traffic jam or road block is directly ahead. Press the multifunction button Press the multifunction button To delete the stopover, press the right rotary control within 8 seconds.
  • Page 24 Press button. Press the multifunction button Route guidance is cancelled by pressing the right rotary control within 8 seconds. Otherwise, route guidance continues. To delete a block, press the right rotary control within 8 seconds.
  • Page 25 For clarification, there follows a selection of examples of pos- sible driving recommendations: After entering the destination (address), the system calculates the route and announces: • "Please perform a U-turn if possible". "Ready to drive off". The driving recommendations are given by voice messages "...
  • Page 26 • "Please follow the road". • "Please leave the roundabout at the third exit on the right". This display tells you that you should follow the course of This display shows you which exit (marked with the ar- the road. row) you must take at the roundabout.
  • Page 27 • "Keep right after 2 kilometres". Dynamic route guidance is not possible in all countries. To use dynamic navigation and the functions de- scribed below, TMC must be switched on, as de- Keeping to the right means that the road forks and you scribed under “Switching TMC on/off”...
  • Page 28 Dynamic route guidance can be started by selecting Current traffic announcements can be displayed in plain text. in the route menu. There are several options for requesting current traffic infor- If dynamic route guidance has been activated, a continuous mation. check is made for the presence of relevant announcements for Traffic information can be requested via the multifunction the selected route.
  • Page 29 Information menu: After the desired traffic information has been confirmed, the For inactive route guidance, the information menu can be information is displayed in full. A typical traffic announce- ment consists of: requested by pressing the left rotary control • a motorway or road number •...
  • Page 30 Press the left rotary control Press the left rotary control The destination, the distance and the estimated time of arrival Press multifunction button are displayed. The journey duration, kilometres travelled and the average speed are displayed. If a stopover has been specified, the stopover, the distance and If navigation is not active, the values of the last journey are the estimated time of arrival are displayed.
  • Page 31 The current time is displayed. After 8 seconds, the system re- turns to the route guidance display. During route guidance, the current position can be requested. During navigation, press the left rotary control . Press multifunction button Press the multifunction button The settings are displayed in a list.
  • Page 32 During route guidance, the planned route list can be request- Press the multifunction button Press the multifunction button The current position with road name (if available), degrees of longitude and latitude, altitude above sea level and the number of satellites received are displayed. The current road and the road names up to the destination are Pressing the right rotary control or the...
  • Page 33 Using the right rotary control , select Menu for selecting special destinations from a specified list. the main navigation menu and press to confirm. Special destinations are e. g. petrol stations, airports or hospi- tals. The destination memory contains personally stored destinations. Once stored, manual entry of the destination is no longer neces- Using the right rotary control , select...
  • Page 34 • Special destinations Special destinations of your choice in countries contained in the navigation CD can be selected. Destinations are listed according to proximity. The figures in kilometres relate to the direct distance (as the crow flies) be- tween the special destination and the current location. The arrows following the distance information indicate the Using the right rotary control , select either...
  • Page 35 Select The special destinations for the selected town are displayed. Using the right rotary control , select a category and Using the right rotary control , select a category and press to confirm. press to confirm. A list with special destinations is displayed or if there are A list with special destinations is displayed or if there are more than 9 entries in the list, you will be requested to en- more than 9 entries in the list, you will be requested to en-...
  • Page 36 Select the desired category with the right rotary control Then, press the right rotary control to confirm the category. The following contains the general description of the points of interest (or P.O.I.) CD accompanying the unit. If the set user language is identical with one of the languages available on the CD, the categories are dis- There are two methods of selecting a point of interest from a played in this language.
  • Page 37   granting of sublicenses. Use of the data is only permitted in this spe- "! cific Becker system. It is forbidden to extract or make further use of !  significant parts of the database content, or to duplicate, copy,...
  • Page 38 • Language setting for the navigation system. In the main navigation menu, press the button. The star also enables recognition of the entry for setting a The system settings menu is requested. language, even if an unknown language is active. •...
  • Page 39 In order to achieve correct navigation on routes requiring guidance under time restrictions and to calculate the estimat- ed time of arrival, it is necessary to set the GMT time trans- mitted from satellites to the current time zone. Select in the system settings menu and con- firm.

  • Page 40: Digitised Area

    Request the destination memory (see page 107) and select destination using the right rotary control If the position is outside a digitised area, the driver is guided to the digitised route nearest to the destination. The announce- Select in the system settings menu and confirm. ment "Your destination is nearby"...
  • Page 41 Select in the system settings menu and confirm. Select in the system settings menu and confirm. stands for stimated ime of rrival. It is possible to select between animations briefly pressing the right rotary control Press and hold the right rotary control to accept the setting.
  • Page 42 Select from the system settings menu and Select and confirm in the system set- confirm. tings menu. stands for stimated ime of rrival. !&      $p  Select the measuring unit using the right rotary control The measuring unit is accepted by pressing the control.
  • Page 43 Select and confirm in the system settings menu. Use the right rotary control to select the desired setting. • The display shows the remaining travel time. • The display shows the estimated time of arrival. • The display shows the current time. Selection is confirmed by pressing the control.
  • Page 44 hqv‚À‚qr By pressing several times, the planes can be se- Press button. lected. The radio is set to the previously selected waveband. • (see also page 144). • (see also page 144) In radio mode, press the button. • (see also page 144) •...
  • Page 45 If a programme has previously been selected that belongs to the particular transmitter chain, the last stored programme en- In radio menu mode, press the multifunction button re- try will be automatically selected. peatedly until is dis- played. The multifunction button indicates that the button can be pressed for displaying and selecting additional transmit- ters.
  • Page 46 In order to switch the filter function on or off, repeatedly press the multifunction button . The filter function is switched In the desired waveband ( ) press the right ro- on ( ) or off ( tary control is displayed. In radio menu mode, press the multifunction button.
  • Page 47 : Press the multi- Select radio menu mode. function button. The stored transmitter is requested. 12 transmitters can be stored under station buttons. Search for the desired transmitter and press the desired multi- function button until a signal tone sounds. Using the multifunction button select either (PTY...
  • Page 48 On the display, active manual tuning is indicated by . Af- ter a short delay and without turning the right rotary In the desired waveband, press the button. control disappears and manual tuning is switched off. In the desired waveband, press the button.
  • Page 49 If, despite RDS diversity function, the reception quality of a regional sub-programme is inferior, bear in mind that regional The RDS diversity function is independent of region. If the sub-programmes are transmitted for the most part over only a RDS diversity function should switch among various regional few frequencies.
  • Page 50 Select FM radio menu mode. Using the multifunction button If an RDS diversity transmitter transmits TP announcements, switch on radio text. it is possible to interrupt CD, CDC/AUX, MW, LW or SW operation or the mute function and to switch through the transmitted TP announcement.
  • Page 51 When TMC is switched on: In all modes and wavebands, TP can be switched on/off by • With TMC, the unit is capable of selecting a suitable pressing the button for more than 2 seconds. traffic programme transmitter automatically. If possible, a TP can also be switched on/off in the TP - menu.
  • Page 52 selected transmitter is accepted. Only applies when Press the multifunction button. In all modes and wavebands, automatic tracking can be switched on by pressing the button for more than 2 seconds. To switch on automatic tracking in the TP menu, press the multifunction button repeatedly until displayed.

  • Page 53: Dynamic Navigation With Tmc

    During a TP announcement, briefly press the button. The announcement currently being broadcast will be You can find further information on TMC under interrupted and the system will automatically return to the “Dynamic navigation with TMC” auf Seite 101. previously selected mode. Activate the TP menu.
  • Page 54 If a radio station transmits TMC information in addition to the The telephone characteristics can be set in the user menu radio programme, this is indicated on the display by the (page 136) if a telephone system is installed in the vehicle and abbreviation .
  • Page 55 89ƒr…h‡v‚ Sound interruptions may occur if the CD is dirty. In order to Press and hold button; the display folds downwards and ensure optimum tone quality, please note the following: the CD slot becomes visible. Insert the disc into the CD slot with the printed side upwards.

  • Page 56: Scan Search

    Press the multifunction button (forwards) or By pressing the multifunction button (audible) fast for- (backwards). ward is activated, or by pressing the multifunction button (audible) fast rewind is activated. By pressing the multifunction button repeatedly, several tracks can be skipped over in forward or reverse directions. Fast forward / rewind is terminated by releasing the multi- The unit switches to the first track when the last track has function button.
  • Page 57 By pressing the multifunction button the track repeat A temperature protection circuit is utilised in this unit in order function is switched on. The prompt is displayed inverse- to protect the laser diode against overheating. When the protection circuit is requested, is displayed for 8 seconds and the unit switches back to radio operation.
  • Page 58 89Ãpuhtr…ƒr…h‡v‚ The last CD to be played is played from the position at which it was left before switching off. If a CD changer is connected to the car radio, it is ready for Stored CDs can be selected by turning the right rotary operation when loaded with a full CD magazine.
  • Page 59 Using the right rotary control , select the desired letters and In CD changer mode, press the button. Then press the press to confirm. multifunction button. Press the right rotary control to move one place further. A maximum of 8 characters can be entered. The name is stored after quitting the CDC menu.
  • Page 60 In CD changer mode, press the button. Then press the multifunction button. For the Silverstone 2660 CD changer, the individual tracks of the current CD can be selected using the right rotary control . It is then possible to select between (track not filtered) and (track filtered out) by pressing the right...
  • Page 61 V†r…Àrˆ After requesting the user menu, the following basic settings The GAL is a car radio control circuit, which automatically can be selected on two planes according to your personal pref- adjusts the car radio volume according to vehicle speed. This erence.
  • Page 62 If a telephone system with handsfree unit is installed in the vehi- cle, the telephone conversation can be conducted via the car ra- dio system. Thus, installation of the additional loudspeaker which is normally required is not necessary. However, the signal cables (AF - telephone input and earth - telephone input) must be The setting is stored automatically.
  • Page 63 Three different reception optimisation settings can be select- The flashing of the LED (flashes when unit is switched off) ed in order to suppress reception-dependent interference and can be switched on or off using this function. reflections. Request the user menu. By pressing the multifunction button Request the user menu.
  • Page 64 For selection, request user menu. By pressing the multifunc- tion button request the second plane of the user menu. When the Navigation is not active, it is possible to have a compass and the current time shown on the right side of the Using the multifunction button select either display.
  • Page 65 the volume of signal tones (e.g. storage confirmation) can be set using this function. For selection, request user menu. By pressing multifunction button request the second plane of the user menu. Press multifunction button. Using the right rotary control select either 0 (quiet) or + 5 (loud). The setting is stored automatically.
  • Page 66 Tr…‰vprÀrˆ In order to select the service menu, press the and the 10 multifunction buttons simultaneously in radio mode. The following information can be requested from the service menu. • display of model number • display of serial number • - reset triggering for CDC (if present).
  • Page 67 Reversing lamp signal Subwoofer LineOut Telephone mute / clearing function Permanent positive (terminal 30) Control output for automatic antenna/amplifier 7-12 Special connection for Becker CD changer Illumination (terminal 58) Switched positive (terminal 15) Earth (terminal 31) AF telephone input Earth - telephone input...
  • Page 68 r€‚‰hyÃÃv†‡hyyh‡v‚Ãtˆvqr A universal bracket for DIN installation slots is integrated into this car radio. An installation frame is not required. The unit is inserted into the installation slot and secured with the slides supplied. Complete the electrical connections. Then push the unit into the installation slot. Subsequently, push the slides into the apertures in the front of the unit to the first detent position (Figure A).
  • Page 69 For removal, the unit must first be unlocked. For this purpose, push in both slides to the second detent position, as shown in Figure A. Subsequently, withdraw the unit with both slides. (Figure C). Then remove the slides by pressing the springs on the right and left sides of the unit.

  • Page 70: Fm Manual Tuning

    Brr…hyÃv†‡…ˆp‡v‚† This car radio is capable of receiving RDS signals (RDS = In the plane, only identified RDS stations Radio Data System) in the VHF range. RDS is a technique can be stored. The unit constantly switches to the best receiv- which enables the transmission of inaudible additional infor- able transmission frequency for the station.
  • Page 71 Interviews Travel reports Specific types of programme, such as e.g. sport, pop music, Leisure reports classical music etc., can be selected using the PTY function. Jazz music The PTY is broadcast by the RDS transmitter, provided that Country music the transmitter is equipped with this function. The selected National folk music transmitter programme type can be displayed or a search for Oldies...
  • Page 72 Low active level < 2 Volt 12 V The Becker Silverstone 2630 and Silverstone 2660 CD changers can be connected. Only CDs which conform to DIN EN 60908 may be used. The use of 8 cm CDs with adapter is not recommended.
  • Page 73 Dear listener, In conformance with current EC guidelines, any person may operate this radio receiver. This unit conforms to the current valid European or harmonised national regulations. The designation is your guarantee of conformance to the applicable specifications concerning electromagnetic compat- ibility for the unit.

This manual is also suitable for:

Traffic pro high speed 7823Traffic pro high speed 7825Traffic pro high speed limited edition 7824Traffic pro high speed 7820Traffic pro 4723Traffic pro 4725 ... Show all

Table of Contents