Selecting Junction For Destination Road; Entering Destination Via Geo-Coordinates - Becker CASCADE PRO Operation Manual

2022
A list containing ranges of house num-
bers appears.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required range.
You can now start route guidance by
Start route guidance
selecting .
Selecting junction for
destination road
Note:
A junction can only be selected if this
information is stored in the navigation
data.
! In the Enter Destination menu, select
Intersection .
2023
Confirm your selection by pressing
!
the rotary control/push button
2024
A list of junctions appears.
Note:
If the destination road entered crosses
more than 9 roads, a data entry menu
corresponding to the data entry menu
for roads appears.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required junction.
Navigation mode
Entering destination
via geo-coordinates
You can also enter a destination as geo-
coordinates.
.
! In the Enter Destination menu, select
Geo co-ordinates .
2097
! Confirm your selection by pressing
the rotary control/ push button
2098
The input menu for the geo-coordinates
will appear.
Turn the rotary control/push button
!
and then press the rotary control/
push button to select the digits of the
coordinates one after the other.
.
33