Advertisement
For example, if you want navigation
guidance from a town which is only cov-
ered by CD 2 (CD 2 has been inserted) to
a town which is only covered by CD 3
enter the destination as follows. Select
the country of destination. Then enter
the town required. You can now select
the town centre and start route guidance.
You will then be guided to the centre of
the town required. As soon as you have
left the last trunk road before your desti-
nation,
OFFROAD
and a direction arrow
will be displayed. In this case, the direc-
tion arrow indicates the linear direction
to the selected town centre.
If you would like to be directed to a par-
ticular road at the destination you can, as
soon as you are on a trunk road (or in the
area completely covered by CD 3), in-
sert CD 3, enter the exact address of the
destination and begin guidance to this
road.
Subject to errors and technical changes
Notes:
• If you know your way around the
town you are starting out from well
you could insert CD 3 from the begin-
ning and enter the exact destination
address. The system will then show
and a direction arrow until
OFFROAD
you reach a trunk road. In this case,
the direction arrow always indicates
the linear direction to the nearest
trunk road.
To prevent
being display-
OFFROAD
ed, you can insert CD 2 after the route
has been calculated. Guidance then
takes place in the usual way.
• When the different CDs are changed
you will be shown the message
. Confirm this
CHANGE MAP DATA?
message by pressing the right rotary
control
. A progress indicator is
displayed while the map data is being
loaded. You can enter the required
destination once the progress indica-
tor has disappeared.
13
Navigation CD 2.X
Displaying/changing settings
during route guidance
X
During route guidance, press the left
rotary control
X
Press the
The current settings are displayed in a list.
You can display or change the following
settings:
•
ROUTE:
Stipulations on the method of route
calculation.
•
ETA:
Method of calculating the estimated
time of arrival.
Copyright by HARMAN/BECKER Automotive Systems GmbH, D-76303 Karlsbad
.
multifunction button.
Advertisement
