Navigation mode
Notes:
• Dynamic route guidance is not possi-
ble in all countries at present.
• When new route calculations are
made with active dynamic route guid-
ance, the Traffic Pro may request the
navigation CD (if it is not already
inserted).
•
With this setting, the route with the
shortest possible travel time to the
destination is calculated.
•
With this setting, the route with the
shortest possible distance to the desti-
nation is calculated.
•
,
and
You can use these entries for example
to exclude ferries or motorways from
the route calculation. The Traffic Pro
will then attempt to calculate a route
which does not contain any motor-
ways or ferries.
34
Notes:
• Routes without motorways can only
be calculated for short distances (up
to 200 km depending on digitalisation
density).
• Even if
(e.g. in Switzerland or Austria) will
be included in the route calculation.
Saving/Deleting route options
X
In the Route Options menu, select
.
X
Confirm your selection by pressing
the rotary control/push button
or
X
Press
You can now start route guidance
,
is selected, toll roads
.
.
Saving a destination
Once you have entered a destination,
you can save it in the address book. This
may be useful if you wish to travel to
this destination again at a later date.
In the Enter Destination menu, select
X
.
2027
X
Confirm your selection by pressing
the rotary control/push button
Proceed as described in "Saving an entry
in the address book" on page 36.
.