Setting Roll Paper Holder - Star Micronics gemini-10X User Manual

1-7 Setting Roll Paper Holder
(1) Lift the printer a little bit, then slide in the roll paper holder
to the printer.
Insert the hooks of the roll paper holder to the holes ·which are
provided at the back side of the printer.
Fig. 1-10 Setting Roll Paper Holder
(2) Insert roll paper onto holder shaft.
Pay attention to winding direction of the roll paper.
Roll
Holder Shaft
<'~
/
.~
~ /~,
paper/~~l
Fig. 1-11 Setting Holder Shaft
-10-