Table of Contents
Advertisement
1-5
Removing and Mounting of Tractor Unit
The Gemini tractor unit is easy to remove or install.
During shipment, the tractor unit is mounted on the printer.
However, this unit is only necessary for Sprocket paper.
When other papers (Single sheet, Roll paper) are used, the unit should
be removed.
1-5-1
Removing of Tractor Unit
(1) Turn off the power switch.(This is not really a "requirement".)
(2) Remove the printer cover.
(3) Identify the "snap levers" by comparing your printer with the Gemini
shown in Fig. 1-7.
(4) Pull both "snap levers" forward (the one on the right and the one on
the left of the tractor unit), and at the same time •••
(5)
Rock the tractor unit up and back, about a half-inch.
The tractor unit rests On two "stoppers" just above the right and left
ends of the platen.
This step in removing the tractor is done by simply rocking the unit
backwards, after you've released the snap levers that hold it in place.
(6) Now lift the tractor unit toward you, up and forward from the printer.
Snap Lever
Tractor Frame
Snap Lever
Printer'
Fig. 1-7
Removal of Tractor Unit
-7-
Advertisement
Table of Contents
