Table of Contents
Advertisement
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
CODE:
ESC
J
n
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
Change the line feed to n/144 inches
CHR$(27) CHR$(Sl) CHR$(n)
When this command is sent to the printer, successive line
feeds are set to n/144 inches.
The value of
n
must be between 1 and 127.
ESC 0, ESC 1, ESC 2, ESC A
n,
ESC
J n
Send a one-time-only line feed of n/144 inches
CHR$(27) CHR$(74) CHR$(n)
When this code is sent to the printer, it causes the paper
to be advanced by n/144 inches.
The value of n must be between 1 and 127.
This command does not change the size of the existing line
feed value.
ESC 0, ESC 1, ESC 2, ESC A
n,
ESC 3 n
-43-
Advertisement
Table of Contents
