Table of Contents
Advertisement
CODE:
ESC D nj n2 ••.•. NUL
PURPOSE:
FORMAT:
REMARKS:
Set the horizontal tab positions
CHR$(27) CHR$(68) CHR$(nj) CHR$(n2) ••••••••••• CHR$(O)
When this command is sent to the printer, the existing
horizontal tab positions are cancelled.
The new horizontal tab positions are set to column nj,
nz,
The NUL [CHR$(O)] character is used to end the command.
The value of
n
must be between 1 and 255, and
nl
should
be less than
n2,
n2
less than
n3,
etc.
REFERENCE:
HT
CODE:
ESC
b
n
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
CODE:
BS
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
Send a one-time-only horizontal tab of
n
columns
CHR$(27) CHR$(98) CHR$(n)
When this command is sent to the printer, the print head
is shifted n columns to the right.
The value of n must be between 1 and 127.
This command does not change the preset horizontal tab
positions.
ESC D nj nZ ••••• NUL. HT
Move the print head back one space
CHR$ (8)
When the BS code is sent to the printer, the print head
is shifted one print column to the left.
The BS code can be used- to overprint characters.
DEL
-48-
Advertisement
Table of Contents
