Table of Contents
Advertisement
(2) Setting of DIP Switch 2
It is possible to set from the rear of the printer without disassemblying
the upper case, as shown in Fig. 2-5.
"
DIP Switch
2
#
Fig. 2-5
Setting of DIP Switch 2
[Function of DIP Switch
2]
DIP Switch
Pin No.
2-1
2-2
2-3
2-4
Function
Paper-Out
Buffer-Full
Printing
7/8 Bit
Interface
Selection
Automatic
Line Feed
ON
Paper-out signal is
transmitted from the
printer mechanism to
the computer.
Disables the printer
when paper-out.
CR code is ignored, and
print data of one line
is stored in the buffer
until the memory is full
or by input of a LF code.
Interface is set to
7 bits.
Automatic line feed is
performed by input of
CR code.
OFF
Paper-out signal is
not transmitted from
the printer mechanism
to the computer.
Enables the printer
to print with no-paper.
Printing is performed
every time CR code is
input.
Interface is set to
8 bits.
Line feed is not per-
formed by input of
CR code.
(Note) DIP switch pin No. 2-2 overrides DIP switch pin No. 2-4.
-24-
Advertisement
Table of Contents
