Serial Interface Specifications [Option] - Star Micronics gemini-10X User Manual

Hide thumbs Also See for gemini-10X:
Table of Contents

Advertisement

6-5
Serial Interface (Option)
Two serial interface boards are optionally available to be installed in
the lower case of the Gemini-lOX printer.
The general specifications of these boards are shown below.
For details, please refer to the manual of each serial interface board.
ITEM
Synchronization System
Bit Rate
Word Length
Start Bit
Data Bit
Parity Bit
Stop Bit
Signal Polarity
Mark
Space
Handshaking
SPECIFICATIONS
Asynchronous
[Simplified Serial Version]
110
~
9,600 bit per second (BPS) {Selectable}
[Buffered Serial Version]
110
~
19,200 BPS {Selectable}
1 bit
7 or 8 bits {Selectable}
Odd, Even or None {Selectable}
1 or 2 bit length
Logic "1" (-3V '" -15V)
Logic "0" (+3V '" +15V)
[Simplified Serial Version]
1 Byte Serial Busy Mode
[Buffered Serial Version]
1 Byte Serial Busy Mode
1 Block Serial Busy Mode
ACK Mode
XON/XOFF Mode
{Selectable}
-66-

Advertisement

Table of Contents
loading

Table of Contents