Star Micronics gemini-10X User Manual page 41

CODE:
ESC W 1
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
CODE:
ESC
W 0
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
CODE:
SO
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
CODE:
DC4
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
CODE:
ESC SO
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
CODE:
ESC Sl
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
Cause the printer to print in Enlarged mode
CHR$(27) CHR$(87) CHR$(l)
After this code is sent, subsequent data are converted to
5
cpr
(character per inch), 12
cpr
pitch is converted to
6 CPl, and 17
cpr
is converted to 8.5
cpr.
This command is cancelled by the transmission of the ESC W
a
code.
ESC W 0, SO, ESC SO, DC4
Cause the printer to print in Normal mode
CHR$(27) CHR$(87) CRR$(O)
This command cancels the Enlarged mode set by ESC
W
1 code
or SO code, and set in the normal mode (10 CPl, 12
cpr
and
17
Cpr).
ESC W 1, SO, ESC
so,
DC4
Cause the printer to print in Enlarged mode
CRRS (14)
A single-character command to cause the printer set in
Enlarged mode.
This command is cancelled by the transmission of the ESC W 0
code, or DC4 code, or CR code, or at the end of one line of
print.
ESC W 1, ESC W 0, ESC SO, DC4
Cause the printer to print in Normal mode
CHR$(20)
A single-character command to cancel the SO code.
ESC W 1, ESC W 0, SO, ESC SO
Cause the printer to print in Enlarged mode
CRR$(27) CHR$(14)
Same as the SO code. Please refer to the SO code.
SO, ESC W 1, ESC W 0, DC4
Set the print pitch to Condensed print mode
CHR$(27) CRR$(15)
Same as the
sr
code. Please refer to the S1 code.
S1, ESC B 1, ESC B 2, ESC B 3, DC2
-38-