1-3
Location of the Printer
When you install the Gemini printer, the following points should be
observed.
(1)
Place the printer horizontally.
(2)
Avoid places where the printer is exposed to direct sunshine or
close to a heater, or heat generating applicances.
(3)
Do not operate the printer under circumstances of extreme high
or low temperature, or of strong vibration.
(4)
Do not operate the printer in a place of high humidity or a dusty
place with oil or iron particles.
(5)
Provide a separate power supply away from applicances or noise
generating motors.
(6)
Power supply voltage shall be the same voltage as specified on
the identification plate.
Extremely high or low power voltage may cause printer problems.
-4-