Rhu-T900 (Large Paper Roll Holder) - Star Micronics TUP900 Integration Manual

Mounting
TUP900
Mounting the Printer Unit
Use the four holes (a, b, c, and d) shown below to secure the printer unit.
Fig. 8.1A
RHU-T900
Vertical Layout
When using the RHU-T900 the vertical layout, it is necessary to mount
the printer to the RHU-T900. Use the printer unit holes (a, b, c and d)
and the RHU-T900 unit holes (a, b, c and d) to join the units together.
When doing so, align a with a, b with b, and so on. Once the two units
are joined, use the holes (A, B, C and D) shown below to secure the
entire unit.
Horizontal Layout
Use the four holes (A, B, C and D) shown in figure below to secure the
RHU-T900.
Fig. 8.1B