Parallel; Font; Horizontal Pitch; Vertical Pitch - Genicom LA36 User Manual

1 and
Macro
Macro 2 Options Values
<PRTCL PARL>
(Protocol Parallel)
DEC PPL2
IBM
EPSON ESCP Epson printers using the ESC/P2 protocol (factory
<FONT>
DRAFT
HSDRAFT
HI-IMPACT
PICA
COURIER
PRESTIGE
COMPRESSED Compressed 17 font
BOLDFACE
TIMELESS
NIMBUS-SAN Nimbus-Sans PS font
OCR A
OCR B
<HORZ PITCH> ## CPI

(Horizontal Pitch)

<VERT PITCH> ## LPI

(Vertical Pitch)

## LPCM
Description
Select a protocol for the parallel interface. This is
invalid and skipped when PORT DEPND is not
selected for the <PROTOCOL> option.
DEC PPL2 printers
PPX24 – IBM Proprinter X24E printers (LA36N)
– IBM Proprinter XL24E printers (LA36W)
(Either is selected as factory setting for Macro 1.)
setting for Macro 2)
Select a font to be active when the power is turned on.
For fixed-spaced fonts, be sure to change the
horizontal pitch as well.
Draft font (lower resolution than letter quality, 3 times
the speed of letter quality)
High-speed draft font (lower resolution than draft
quality, 3.3 times the speed of letter quality)
High-impact draft font (lower resolution than letter
quality, 1.5 times the speed of letter quality with high
copying capability)
Pica 10 font
Courier 10 font
Prestige 12 font
Boldface PS font
Timeless PS font
OCR A 10 font
OCR B 10 font
10, 12, 13.2, 15, 16.5, 17, 18, or 20
(characters per horizontal inch)
2, 3, 4, 6, 8, or 12
(lines per vertical inch)
1, 2, or 4
(lines per centimeter)
Using Set-Up Mode
4-17