Tools Screen 2 - Supplies, Configuration, Tests, Power Saver - Xerox Document Centre 240 Reference Manual

Tools Screen 2 - Supplies, Configuration, Tests, Power Saver

Supplies Management
Refer to page 9-40
Configuration and Setup
Refer to page 9-44
Remote Data Transfer Setups
Refer to page 11-3
Machine Tests
Refer to page 9-47
Power Saver Administration
Refer to page 9-42
Software Reset
l
Reset System Software or Network
Controller
Refer to page 9-46
Page 9 - 6
This selection accesses the options for:
l
Service Plan
l
Warning Message Notification
l
Replacement Method
l
Feed Roll Cartridge Replacement
This selection accesses the options for:
l
Document Scanner Cover Color
l
50/60 Hz
l
Optional Services
l
Xerox Customer Center Number
l
Disk Finisher Setup
l
Paper Tray Registration Setup
This is where you setup the Remote Data Transfer
information or Sixth Sense.
Allows access to machine diagnostics to assist you in
identifying machine problems. On a DC model, this
option is located on the first Tools screen.
Where the time interval is set to switch from Standby
to Low Power and subsequently from Low Power to
Sleep or on a DC model to off. You can also enable or
disable the automatic power down feature.
This is the button to access where you reset some
machine systems without powering off the machine.
On a DC model, this option is located on the first
Tools screen.
Xerox Document Centre Reference Guide