Outputting System Information To A Monitor Terminal - HP 4800G Series Configuration Manual

To do...
Configure the format of the time
stamp
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the console:
To do...
Enable the monitoring of
system information on the
console
Enable the display of
debugging information on the
console
Enable the display of log
information on the console
Enable the display of trap
information on the console

Outputting System Information to a Monitor Terminal

System information can also be output to a monitor terminal, which is a user terminal that has login
connections through the AUX, VTY user interface.
Outputting system information to a monitor terminal
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel through
which system information can
be output to a monitor terminal
Use the command...
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Use the command...
terminal monitor
terminal debugging
terminal logging
terminal trapping
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center monitor channel
{ channel-number |
channel-name }
1-7
Remarks
Optional
The time stamp format for log,
trap and debugging information
is date by default.
Remarks
Optional
Enabled on the console and
disabled on the monitor
terminal by default.
Required
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
Remarks
—
Optional
Enabled by default
Optional
Refer to Table 1-2 for default
channel names.
Optional
By default, system information
is output to the monitor terminal
through channel 1 (known as
monitor).