Remote Access To Call Forwarding; Setting Or Changing Remote Forwarding; Canceling Remote Forwarding - Cisco 7960 User Manual

Remote Access to Call Forwarding

This feature allows you to call a DID number from any telephone and set, change
or cancel the destination phone number that is the forwarding target for all incoming
calls to your telephone. Contact your system administrator for the DID number to
call to make use of this feature.

Setting or Changing Remote Forwarding

1. Dial the DID number for Remote Access to Call Forwarding.
(If calling from an internal business phone, dial 9 first.)
NOTE: A voice prompt leads you through the remaining steps.
2. Enter the complete phone number of your IP phone, followed by the # key.
3. Enter the phone's password, followed by the # key
If you have your phone forwarded to another phone, your current forwarding
number is announced.
4. Enter the new forwarding number followed by the # key. Enter the number as
if you were dialing it, including the area code if necessary.
You hear an announcement that the forwarding number has been changed
and the call is idled.

Canceling Remote Forwarding

1. Dial the DID number for Remote Access to Call Forwarding.
(If calling from an internal business phone, dial 9 first.)
NOTE: A voice prompt leads you through the remaining steps.
2. Enter the complete phone number you want to access, followed by the # key.
3. Enter the phone's password, followed by the # key
If you have your phone forwarded to another phone, your current forwarding
number is announced.
4. Do one of the following:
•
or
•
68 System Telephone Features
Press # to cancel remote forwarding
You hear an announcement that the forwarding number has been
changed and the call is idled.
Hang up without pressing any keys to quit the canceling operation.
Cisco 7960/7940 Telephone User Guide
621-00000116