Redial; Using The Phone; Using Star Codes; Remote Access To Call Forwarding - Cisco 7912 - TEKELEC Manual

Redial

Redial

Using the Phone

Using Star Codes

Remote Access to Call Forwarding

Setting or Changing Remote Forwarding

54 System Telephone Features
This feature lets you redial the last number (internal or external) that you dialed.
1. Pick up the handset.
2. Press the Redial button.
3. Speak to the called party.
NOTE: If you wait until the called party answers before picking up the handset, you must
press the Hold button (
1. Dial *07.
2. Press the Dial soft key or pickup the handset.
3. Speak to the called party.
This feature allows you to call a DID number from any telephone and set, change
or cancel the destination phone number that is the forwarding target for all incoming
calls to your telephone. Contact your system administrator for the DID number to
call to make use of this feature.
1. Dial the DID number for Remote Access to Call Forwarding.
(If calling from an internal business phone, dial 9 first.)
A voice prompt leads you through the remaining steps.
2. Enter the complete phone number of your IP phone, followed by the # key.
EXAMPLE: 9723353421# or 9723352100*2001# for Non-DID numbers.
3. Enter the phone's password, followed by the # key
If you have your phone forwarded to another phone, your current forwarding
number is announced.
4. Enter the new forwarding number followed by the # key. Enter the number as
if you were dialing it, including the area code if necessary.
You hear an announcement that the forwarding number has been changed
and the call is idled.
) to speak with the called party.
Cisco 7912 Telephone User Guide
620-05600350