Setting Up Tapi - Cisco 7960 User Manual

•
•
•

Setting Up TAPI

Use the following steps to set up TAPI 2.1-compliant Service Provider in Windows.
These steps are from Windows 2000. Other Windows versions should be similar.
1. Click Start, Settings and Control Panel to open the Control panel window.
2. Double click Phone and Modem Options (circled).
3. Click Edit (circled) in the Phone and Modem Options dialog box.
142 Set Up Outlook for TAPI
The program must be set to use VocalData Telephone Service Provider
that must be installed on your PC.
The access codes required for outside calls (usually 9 or 8) must be
configured.
Instructions for handling area codes and, if necessary, 10-digit dialing
must be configured.
Cisco 7960/7940 Telephone User Guide
621-00000116