On-Hook Dialing; One-Touch Transfer - Cisco 7960 User Manual

State
Permanent
(**Night)
Return to
Normal

On-hook Dialing

You can dial a number while the handset is on-hook by doing one of the following:
•
•
•
•
•
•
•
TIP: You can pick the handset up at any time to conduct a private
conversation.

One-Touch Transfer

One-Touch Transfer allows you to transfer a call using predefined one-touch
transfer buttons. You can make instant, "unsupervised" transfers with this feature,
which is typically assigned to the receptionist's telephone. The VoIP system
administrator assigns either extension numbers or voice mail destinations to the
buttons used for one-touch transfers. See also "Blind Transfer" on page 25 and
"Transfer" on page 77.
Cisco 7960/7940 Telephone User Guide
621-00000116
Activation
Press the Night
button twice.
Press the Night
button twice.
Dial the phone number on the keypad and:
•
on the 7960 SCCP, press the Dial soft key, or
•
pick up the handset, or
•
press the SPEAKER button, or
•
press a line button.
Press the desired line button and dial the number.
Press the SPEAKER button and dial the number.
Press a speed dial button.
Press the Redial soft key.
Press the Intercom (Intcom) soft key.
Press the NewCall softkey and enter a number.
Definition
Changes the mode, but
requires manual
intervention to return to
the Normal state.
Night mode is disabled,
whether it is Temporary
or Permanent.
System Telephone Features
Example
Attendant will be out for
several days and no
one will answer the
main number.
Attendant uses
Permanent Night
mode, which remains
in effect until the Night
button is pressed
again.
55