Event Notification - Fujitsu ETERNUS DX80 S2 User Manual

Chapter 4 Operations
4.2 Monitoring ETERNUS DX Disk Storage System Status
4.2.3

Event Notification

By setting event notification, if an error (event) occurs in the ETERNUS DX Disk storage system, the event
information is notified.
The methods that can be used to notify an event are "e-mail", "SNMP Trap", "syslog", "remote support", and
"host sense".
For the procedure on setting event notification, refer to "User's Guide -Installation-".
■ E-mail
When an event occurs in the ETERNUS DX Disk storage system, an e-mail is sent to the specified e-mail
address.
For more details on notified event information, refer to
103).
■ SNMP Trap
When an event occurs in the ETERNUS DX Disk storage system, an SNMP Trap is sent to the SNMP Manager
(monitoring server).
For more details on event information notified by SNMP Trap, refer to
List" (page 103).
■ Syslog
When an event occurs in the ETERNUS DX Disk storage system, the event log can be sent to the external server
(syslog server).
For the notified syslog messages, refer to
■ Remote Support
The information for errors that occur in the ETERNUS DX Disk storage system is notified to the remote support
center.
■ Host Sense
When an event occurs in the ETERNUS DX Disk storage system, host senses (sense codes) are sent to the
server. For details on sense codes, refer to
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
"Appendix A Event Notification Message List" (page
"Appendix A Event Notification Message List" (page
"Appendix A Event Notification Message List" (page
62
Copyright 2013 FUJITSU LIMITED
"Appendix A Event Notification Message
103).
103).
P3AM-4842-12ENZ0