Fujitsu ETERNUS DX80 S2 User Manual page 169

Appendix B Audit Log List
Event code
02080008
02080009
0208000A
0208000B
0208000C
0208000D
0208000E
0208000F
02080010
02080011
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Upper: Message
Lower: Detailed information
Delete Snap Data Pool Volume
$a $b
[No= Mode= ]
Start Advanced Copy
$a $b
[Type= Source_No= Destination_No=
Delete Advanced Copy
$a $b
[ID= Mode= ]
Set Host Port Mode
$a $b
[Port= Mode= ]
Modify REC path
Detail information is not displayed.
Set REC Round Trip Time
$a $b
[Box_ID= Time= ]
Set REC Multiplicity
[Box_ID= $a Multiplicity= $b Priority_Level=
$d
Sch_Mode= ]
Set REC Buffer
$a $b $c
[No= Vol_Type= Box_ID=
$f $g
Interval= Wait_Timer= Monitor=
$i
IO_Response_Priority= HALT_Priority=
Delete REC Buffer
$a
[No= ]
Create REC Disk Buffer
$a $b $c
[No= Name= Disk= CM=
$f
Stripe_Depth= ]
Copyright 2013 FUJITSU LIMITED
The SDPV is deleted.
$a : SDPV number
$b
: Mode (Force, Reservation)
The SnapOPC+ is started.
$a : Type (SnapOPC+)
$c
]
$b
: Copy source volume number
$c
: Copy destination volume number
The copy session is stopped.
$a
: Session ID
$b
: Deletion mode (Force, Normal)
The port mode for the host interface port is
changed.
$a
: Port number (example: 001 or "All")
$b : Port mode after changing (CA, RA,
Initiator, CA/RA, CH, CU)
The REC copy path information is set, imported, or
deleted.
The round trip time for the REC is set.
$a : Box ID for the remote device
$b
: Round trip time for the REC [msec] (1 –
65535)
The REC multiplicity is set.
$a
: Box ID for the remote device
$c
$b
: REC Multiplicity (1 - 1024, Auto)
$c
: Priority level (1 - 8, Auto)
$d
: Copy schedule mode (Session Balancing,
Dst RG Balancing)
The REC Buffer is set.
$a
: Group number (REC Buffer number)
$d $e
Size= Type=
$b : Volume type (Open)
$h
$c
: Box ID for the remote device
$j
]
$d : REC Buffer size [MB]
$e
: Buffer type (Receive, Send)
$f
: Forwarding Interval [sec]
$g
: HALT Wait Timer [sec] (0, 5, 10, 15)
$h
: Monitoring Time [sec] (0 – 15)
$i : I/O Priority Mode (Enable, Disable)
$j
: HALT Priority Mode (Enable, Disable)
The REC Buffer is deleted.
$a : Group number (REC Buffer number)
The REC Disk Buffer is created.
$a
: RAID group number
$d $e
Encryption=
$b
: RAID group name
$c : Drive (DE-ID + Slot number (example:
0000, 0001, 0002))
$d
: Assigned CM (0, 1)
$e
: Encryption by CM (Enable, Disable)
$f
: Stripe Depth (64KB, 128KB, 256KB, 512KB,
1024KB)
169
Description
P3AM-4842-12ENZ0