Drive Handling Instructions - Fujitsu ETERNUS DX80 S2 User Manual

Disk storage system
Hide thumbs Also See for ETERNUS DX80 S2:
Table of Contents

Advertisement

Chapter 5 Maintaining Optional Products
5.1 Installing Drives
5.1.3

Drive Handling Instructions

About condensation
CAUTION
About static electricity
CAUTION
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Do
When moving a drive from a cold place, such as an un-conditioned store house
in winter, to a warmer place such as an air-conditioned room, the severe
temperature change may result in condensation forming.
To avoid this, allow the packed drive sufficient time in the warmer place (one
hour for each 15°C of temperature difference) to adapt to the new
temperature.
Do Not
Do not touch the surface of the board of the drives.
Do
When handling drives, make sure to wear a wrist strap or touch a metal part to
discharge the human body's natural static electricity. Failure to discharge
static electricity may cause device failure.
Leave the drive in its package until ready to install it.
66
Copyright 2013 FUJITSU LIMITED
P3AM-4842-12ENZ0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx90 s2

Table of Contents