Fujitsu ETERNUS DX80 S2 User Manual page 170

Appendix B Audit Log List
Event code
02080012
02080013
02080014
02080015
02080016
02090001
02090002
02090003
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Upper: Message
Lower: Detailed information
Set REC Disk Buffer
$a $b
[Group_No= No= ]
Delete REC Disk Buffer
[No= $a ]
Format REC Disk Buffer
[No= $a ]
Export Storage Info
Detail information is not displayed.
Export Backup REC Path
Detail information is not displayed.
Set Network
$a $b $c
[Format= Port= $Speed=
$e $f
Slave= Netmask= Master_Local=
$h
Slave_Local= Master_Connect=
$j
Slave_Connect= Prefix_Length=
Primary_DNS= $m Secondary_DNS=
$o $p
Wake_On= [Allow= Allow_Offset=
Set Firewall
$a $b $c
[Port= Http= Https= Telnet=
$f $g
Mnt_Secure= Icmp= Snmp=
IP_Redirect_Test= $j ]
Set SNMP
$a $b
[Function= Port= Failure_Trap=
Engine_ID= $d Version= $e ]
Copyright 2013 FUJITSU LIMITED
The REC Disk Buffer allocation for the REC Buffer is
changed.
$a
: Group number (REC Buffer number)
$b
: RAID group number
The REC Disk Buffer is deleted.
$a
: RAID group number
The REC Disk Buffer is formatted.
$a
: RAID group number
The storage system information is exported.
The copy path information is exported.
The network environment is set.
$a
: IP address format (IPv4, IPv6)
$d
Master=
$b
: LAN port (MNT, RMT, FST)
$g
$c
: Transfer Rate (1000Mb, 100MbFull,
$i
100MbHalf, 10MbFull, 10MbHalf, Auto)
$k $l
Gateway=
$d
: Master IP Address
$n
$e : Slave IP Address
$q
]]
$f
: Subnet Mask
$g
: Master IP Link Local Address
$h
: Slave IP Link Local Address
$i
: Master Connect IP Address
$j : Slave Connect IP Address
$k
: Length of Subnet Prefix [bit] (3 – 128)
$l : Gateway Address
$m
: Primary DNS IP Address
$n
: Secondary DNS IP Address
$o
: Wake on LAN (Enable, Disable)
$p
: Allowed IP Address
$q
: Allowed IP Offset (1 – 16)
The firewall setting is changed
$a
: LAN port (MNT, RMT, FST)
$d $e
Ssh=
$b : HTTP (Open, Close)
$h $i
RCIL=
$c
: HTTPS (Open, Close)
$d : Telnet (Open, Close)
$e
: SSH (Open, Close)
$f
: Maintenance Secure (Open, Close)
$g
: ICMP (Open, Close)
$h
: SNMP (Open, Close)
$i
: RCIL (Open, Close)
$j
: IP Redirect Test (Open, Close)
The SNMP is set.
$a : SNMP function (Enable, Disable)
$c
$b
: LAN port (MNT, RMT)
$c
: Authentication Failure Trap (Enable,
Disable)
$d
: Engine ID (example: 12, 13 ... or "Default")
$e
: MIB-II version (RFC1213, RFC4293)
170
Description
P3AM-4842-12ENZ0