Fujitsu ETERNUS DX80 S2 User Manual page 179

Appendix B Audit Log List
Event code
020D000C
020D000E
020D000F
020D0010
020E0001
020E0002
020E0003
020E0004
020E0005
020E0006
020E0007
020E0008
020E0009
020E000A
020E000B
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Upper: Message
Lower: Detailed information
Set AIS Connect
$a $b
[Function= Port= Send_Log=
Country_Code= $d Service_Contract=
$f
Server_Certification= Proxy_Server=
Proxy_Port_No= $h Type= $i User_Name=
Send AIS Connect Log
Detail information is not displayed.
Set AIS Connect Remote Session
$a
[Remote_Session= Timeout=
Import AIS SSL Certificate
Detail information is not displayed.
Start Maintenance
Detail information is not displayed.
Stop Maintenance
Detail information is not displayed.
Forced Degradation
$a
[Component= ]
Forced Online
$a
[Component= ]
Preventive Maintenance
[Component= $a ]
Hot Expansion
[Component= $a Change_CM= $b
Hot Deletion
$a $b
[Component= Mode= ]
Delete Sense
Detail information is not displayed.
Set BTU Date
$a $b
[Component= Date= ]
Set Host Port License
Detail information is not displayed.
Upgrade Storage System Model
$a
[Mode= ]
Copyright 2013 FUJITSU LIMITED
The AIS Connect settings are changed.
$a : AIS Connect function (Enable, Disable)
$c
$b
: Port (MNT, RMT)
$e
$c
: Auto Send Log (Enable, Disable)
$g
$d
: Country code
$j ]
$e
: Service contract
$f
: Server Certification (Enable, Disable)
$g
: Proxy server IP address or FQDN
$h : Proxy server port number (0 – 65535)
$i
: Proxy type (HTTP, SOCKS)
$j : User name
The AIS Connect log is sent.
The remote sessions for AIS Connect are set.
$a
: Remote session (Permit, Forbid)
$b
]
$b : Remote session timeout[hour] (1 – 24, or
"Unlimited")
The SSL certificate is imported.
The maintenance operation is started.
The maintenance operation is stopped.
The component is forcibly disabled.
$a
: Component (example: cm0-ca0)
The component is forcibly enabled.
$a
: Component (example: cm0-ca0)
Preventive maintenance of the component is
performed.
$a
: Component (example: cm0-ca0)
Hot expansion of the component is performed.
$a
: Component (example: cm0-ca0)
Mode= $c ]
$b
: Change of assigned CM (Enable, Disable)
$c
: Mode (Canceled)
Hot removal of the component is performed.
$a
: Component (example: cm0-ca0)
$b : Mode (Canceled)
The sense information is deleted.
The battery expiration date is set.
$a
: Component (example: bbu0-btu)
$b : Expiration date (example: 201102)
The license for the additional host interface port is
registered.
The storage system model is upgraded.
$a
: Mode (Canceled)
179
Description
P3AM-4842-12ENZ0