Fujitsu ETERNUS DX80 S2 User Manual page 70

Chapter 5 Maintaining Optional Products
5.1 Installing Drives
3
Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
The removed dummy drive unit should be retained for future use.
4
Install the new drive.
4-1
Press the catch on the drive lock lever to unlock it.
Catch
4-2
Insert the drive all the way into in the slot, making sure that it is firmly seated and keeping the lock
lever open.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Lock lever
Do
WARNING
• Hold the drive with both hands to protect against jarring.
Copyright 2013 FUJITSU LIMITED
Dummy drive unit
Tab
70
P3AM-4842-12ENZ0