Displaying Status Via Eternus Web Gui; Figure 4.3 Eternus Web Gui Screen; Table 4.1 General Status Of Eternus Web Gui - Fujitsu ETERNUS DX80 S2 User Manual

Chapter 4 Operations
4.2 Monitoring ETERNUS DX Disk Storage System Status
4.2.2

Displaying Status via ETERNUS Web GUI

The status of the ETERNUS DX Disk storage system and the usage status of RAID groups, TPPs, and SDPs can be
checked in the Overview screen of ETERNUS Web GUI.

Figure 4.3 ETERNUS Web GUI screen

Table 4.1 shows the general status.
Status of each component in the ETERNUS DX Disk storage system is monitored periodically, and the result is
displayed as a general status image with character strings.
Table 4.1 General status of ETERNUS Web GUI
Refer to "ETERNUS Web GUI User's Guide" for details.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
General status
Normal (Green)
Not Ready (Red)
Error (Red)
Maintenance (Orange)
Warning (Yellow)
Copyright 2013 FUJITSU LIMITED
ETERNUS DX Disk storage system status
The ETERNUS DX Disk storage system is in normal state.
"Not Ready" is a status where an abnormality is detected at a power-off,
and I/O access from the server cannot be received.
The ETERNUS DX Disk storage system is in error state.
The ETERNUS DX Disk storage system is under maintenance.
The ETERNUS DX Disk storage system is in warning state.
61
P3AM-4842-12ENZ0