Figure 1.13 Host Interface (Iscsi 10Gbit/S, Fcoe (For Copper Twinax Cable Connection)); Figure 1.14 Host Interface (Iscsi 1Gbit/S) - Fujitsu ETERNUS DX80 S2 User Manual

Chapter 1 Components
1.1 Controller Enclosure
●
iSCSI 10Gbit/s, FCoE (for Copper Twinax cable connection)

Figure 1.13 Host interface (iSCSI 10Gbit/s, FCoE (for Copper Twinax cable connection))

iSCSI 10Gbit/s, FCoE
Installed host interfaces in the controller
Host interface (CA#0)
• Part explanation
- Host interface ports (iSCSI 10Gbit/s, FCoE (for Copper Twinax cable connection)) (from left to right:
Port#0 and Port#1 in CA#0, Port#0 and Port#1 in CA#1)
These are the connectors to connect Copper Twinax cables.
●
iSCSI 1Gbit/s

Figure 1.14 Host interface (iSCSI 1Gbit/s)

iSCSI 1Gbit/s
Installed host interfaces in the controller
Host interface (CA#0)
• Part explanation
- Host interface ports (iSCSI) (from left to right: Port#0 and Port#1 in CA#0, Port#0 and Port#1 in CA#1)
These are the RJ-45 connectors to connect LAN cables.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Port#0 Port#1
Port#0 Port#1
Copyright 2013 FUJITSU LIMITED
Port#0 Port#1
Host interface (CA#1)
Port#0 Port#1
Host interface (CA#1)
20
P3AM-4842-12ENZ0