Fujitsu ETERNUS DX80 S2 User Manual page 91

Chapter 5 Maintaining Optional Products
5.4 Installing Long Wave SFP+ Modules (16Gbit/s)
7-2
Insert the Long wave SFP+ module (16Gbit/s) all the way into in the port cage.
7-3
Push up the Long wave SFP+ module (16Gbit/s) lever until it clicks into place.
8
Connect the FC cable that is disconnected in
Connect the FC cable connector to the FC port on the Long wave SFP+ module (16Gbit/s).
9
Repeat
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Do
CAUTION
• When connecting the FC cables, position them so that they will not
obstruct replacement of the power supply unit or controllers by the
maintenance engineer.
Step 5 through Step 8 to replace multiple SFP+ modules (FC 16Gbit/s).
Copyright 2013 FUJITSU LIMITED
ever
Step 5.
91
P3AM-4842-12ENZ0