Additional Drive Enclosure Installation - Fujitsu ETERNUS DX80 S2 User Manual

Chapter 5 Maintaining Optional Products
5.2 Installing Drive Enclosures
■ About static electricity
CAUTION
■ About shock
CAUTION
5.2.4

Additional Drive Enclosure Installation

This section explains how to install additional drive enclosures in the ETERNUS DX Disk storage system.
CAUTION
Procedure
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all
components of the ETERNUS DX Disk storage system are in normal status.
In addition, check the DE-IDs (drive enclosure numbers) of the installed enclosures in the
[Drive Enclosure] screen.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Do
• When handling drive enclosures, make sure to wear a wrist strap or touch a
metal part to discharge the human body's natural static electricity. Failure to
discharge static electricity may cause device failure.
Do Not
• Do not handle the drive enclosure roughly or subject it to physical shocks
when laying it down.
• Do not stack the drive enclosures.
• Do not knock or drop the drive enclosure on hard objects.
Do
• If drive enclosures are installed in a way other as described here, damage and/
or device failure or electrical shock may occur.
• Do not install drive enclosures with cables, such as power cords, connected.
• Do not knock the other devices installed in the rack when installing drive
enclosures.
73
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0