Ext. Tel. Rx; Setting The Print Density - Oce VL3200x User Manual

EXT. Tel. RX

If EXT. Tel. RX is On:
The machine can receive a fax automatically,
even if you answer the call. When you see
Receiving on the LCD or hear a click on the
phone line through the handset you are
using, just replace the handset. Your
machine will do the rest.
If EXT. Tel. RX is Off:
If you are at the machine and answer a fax
call first by lifting an external handset, then
press Start, and then press 2 to receive.
If you answered at an extension telephone
press l51. (See Using external and
extension telephones on page 62.)
Note
• If this feature is set to On, but your
machine does not connect a fax call when
you lift an extension telephone handset,
press the fax receive code l51.
• If you send faxes from a computer on the
same telephone line and the machine
intercepts them, set EXT. Tel. RX to Off.
a
Make sure you are in Fax mode.
b
Press Menu, 2, 1, 3.
21.RX Settings
3.Ext. Tel. RX
On
a
b Off
Select ab or OK
c
Press a or b to choose On or Off.
Press OK.
d
Press Stop/Exit.

Setting the Print Density

6
You can adjust the Print Density setting to
make your printed pages darker or lighter.
6
a
Make sure you are in Fax mode.
b
Press Menu, 2, 1, 6.
21.RX Settings
6.Print Density
-nnonn+
Select d c & OK
6
c
Press c to make the print darker.
Or, press d to make the print lighter.
Press OK.
d
Press Stop/Exit.
Receiving a fax
6
6
53