Authentication And Encryption For Wireless Users Only - Oce VL3200x User Manual

Authentication and encryption for wireless users only

Authentication method
The Océ machine supports the following methods:
Open system
Wireless devices are allowed to access the network without any authentication.
Shared key
A secret pre-determined key is shared by all devices that will access the wireless network. The
Océ machine uses the WEP keys as the pre-determined key.
Pre-Shared Key (WPA/WPA2-PSK)
Pre-Shared Key enables the Océ wireless machine to associate with access points using TKIP
or AES.
LEAP
Cisco LEAP (Light Extensible Authentication Protocol) has been developed by Cisco Systems,
Inc. and enables the Océ wireless product to associate with access points using CKIP
encryptions.
EAP-FAST
EAP-FAST (Extensible Authentication Protocol - Flexible Authentication via Secured Tunnel)
has been developed by Cisco Systems, Inc. which uses user ID and password for
authentication, and symmetric key algorithms to achieve a tunneled authentication process.
The Océ machine supports the following inner authentications:
• EAP-FAST/NONE
MS-CHAPv2 is used for Provisioning, and the method of EAP-FAST corresponding to
second phase authentication method.
• EAP-FAST/MS-CHAPv2
Method of EAP-FAST corresponding to CCXv4 that uses MS-CHAPv2 for the inner
method.
• EAP-FAST/GTC
Method of EAP-FAST corresponding to CCXv4 that uses GTC for the inner method.
Encryption methods
Encryption is used to secure the data that is sent over the wireless network. The Océ machine
supports the following encryption methods:
WEP
By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure
key.
Specifications
E
E
E
E
203