Oce VL3200x User Manual page 135

Network difficulties (continued)
Difficulties
The network scanning feature
does not work.
The network PC Fax Receive
feature does not work.
The network printing feature does
not work.
Suggestions
®
(Windows ) The firewall setting on your PC may be rejecting the necessary
network connection. Follow the instructions below to configure your firewall. If you
are using a personal firewall software, see the User's Guide for your software or
contact the software manufacturer.
®
(Windows XP SP2)
a
Click the Start button, Control Panel, Network and Internet Connections
and then Windows Firewall. Make sure that Windows Firewall on the
General tab is set to On.
b
Click the Advanced tab and Settings... button of the
Network Connection Settings.
c
Click the Add button.
d
To add port 54925 for network scanning, enter the information below:
1. In Description of service: Enter any description, for example "Océ
Scanner".
2. In Name or IP address (for example 192.168.0.12) of the computer
hosting this service on your network: Enter "Localhost".
3. In External Port number for this service: Enter "54925".
4. In Internal Port number for this service: Enter "54925".
5. Make sure UDP is chosen.
6. Click OK.
e
Click the Add button.
f
To add port 54926 for network PC Fax, enter the information below:
1. In Description of service: Enter any description, for example "Océ PC
Fax".
2. In Name or IP address (for example 192.168.0.12) of the computer
hosting this service on your network: Enter "Localhost".
3. In External Port number for this service: Enter "54926".
4. In Internal Port number for this service: Enter "54926".
5. Make sure UDP is chosen.
6. Click OK.
g
If you still have trouble with your network connection, click the Add button.
h
To add port 137 for network scanning, network printing and network PC Fax
receiving, enter the information below:
1. In Description of service: Enter any description, for example "Océ PC
Fax receiving".
2. In Name or IP address (for example 192.168.0.12) of the computer
hosting this service on your network: Enter "Localhost".
3. In External Port number for this service: Enter "137".
4. In Internal Port number for this service: Enter "137".
5. Make sure UDP is chosen.
6. Click OK.
i
Make sure if the new setting is added and is checked, and then click OK.
Troubleshooting and routine m aintenance
C
123