Installing Extra Memory - Oce VL3200x User Manual

Installing extra memory

IMPORTANT
If you install the optional memory, the
stored fax jobs in the standard memory
will be deleted.
Before you install, print (Menu 2, 5, 2
(Print Fax)) or send faxes stored in the
memory.
a
Turn off the machine's power switch.
Unplug the telephone line cord.
b
Disconnect the interface cable from the
machine, and then unplug the power
cord from the AC power outlet.
Note
Be sure to turn off the machine's power
switch before you install or remove the
SO-DIMM.
c
Remove the SO-DIMM cover and
interface access cover.
d
Unpack the SO-DIMM and hold it by its
B
edges.
IMPORTANT
To prevent damage to the machine from
static electricity, DO NOT touch the
memory chips or the board surface.
e
Hold the SO-DIMM by the edges and
align the notches in the SO-DIMM with
the protrusions in the slot. Insert the
SO-DIMM diagonally (1), then tilt it
toward the interface board until it clicks
into place (2).
f
Put the interface access cover and the
SO-DIMM cover back on.
g
Plug the machine's power cord back into
the AC power outlet first, and then
connect the interface cable.
h
Plug in the telephone line cord. Turn on
the machine's power switch.
Note
To make sure that you have installed the
SO-DIMM properly, you can print the
Mach. settings page that shows the
current memory size. (See How to print a
report on page 83.)
Options
B
1
2
115