Remote Fax Commands - Oce VL3200x User Manual

Chapter 9

Remote fax commands

Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your R R Passcode (3 digits followed by l), the system will give two
short beeps and you must enter a remote command.
Remote commands
95 Change the fax forwarding or
remote retrieval settings
1 OFF
2 Fax Forwarding
6 Fax storage
96 Retrieve a fax
2 Retrieve all faxes
3 Erase faxes from the memory
97 Check the receiving status
1 Fax
98 Change the Answer Mode
1 External TAM
2 Fax/Tel
3 Fax Only
90 Exit
78
Operation details
You can choose Off after you have retrieved or erased all your
messages.
One long beep means the change is accepted. If you hear three
short beeps, you cannot make the change because something
has not been set up.
Enter the number of a remote fax machine to receive stored fax
messages. (See Retrieving fax messages on page 77.)
If you hear one long beep, fax messages have been erased
from the memory.
You can check whether your machine has received any faxes.
If yes, you will hear one long beep. If no, you will hear three
short beeps.
If you hear one long beep, your change has been accepted.
Press 9 0 to exit remote retrieval. Wait for the long beep, then
replace the handset.
9