Oce VL3200x User Manual page 138

Examples of poor print
quality
F G H
A B C D E
h i j k
a b c d e f g
A B C D
a b c d e
0 1 2 3 4
Page skewed
Ghost
B DEFGH
abc efghijk
A C D
b c d e
1 3 4
Wrinkles or creases
126
Recommendation
Make sure that the paper or other print media is loaded properly in the
paper tray and that the guides are not too tight or too loose against
the paper stack.
Set the paper guides correctly. (See Loading paper in the Upper Tray
on page 10.)
If you are using the MP tray, see Loading paper in the multi-purpose
tray (MP tray) on page 12.
The paper tray may be too full.
Check the paper type and quality. (See Acceptable paper and other
print media on page 15.)
Make sure that you use paper that meets our specifications. Rough-
surfaced paper or thick paper may cause the problem. (See
Acceptable paper and other print media on page 15.)
Make sure that you choose the proper media type in the printer driver
or in the machine's Paper Type menu setting. (See Acceptable paper
and other print media on page 15 and Basic tab in the Software
User's Guide.)
The drum unit may be damaged. Put in a new drum unit. (See
Replacing the drum unit on page 158.)
The fuser unit may be contaminated. Call Océ Technical Support at
1-800-243-5556 (in USA) or 1-866-462-4478 (in Canada).
Check the paper type and quality. (See Acceptable paper and other
print media on page 15.)
Make sure that paper is loaded properly. (See Loading paper in the
Upper Tray on page 10.)
Turn over the stack of paper in the tray or rotate the paper 180° in the
input tray.