Registering The Unique Ring Pattern; Very Important - Oce VL3200x User Manual

Chapter 7
Before you choose the ring pattern to
register
You can only register one Unique Ring
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Océ machine. Register
the one your telephone company gives you.
Ring
Rings
Pattern
1 long-long
2 short-long-short
3 short-short-long
4 very long
(normal pattern)
Note
• Ring Pattern #1 is often called Short-Short
and is the most commonly used.
• If the ring pattern you received is not on
this chart, please call your telephone
company and ask for one that is
shown.
The machine will only answer calls to its
registered number.
The first two rings are silent on the
machine. This is because the fax must
<<listen>> to the ring pattern (to compare
it to the pattern that was 'registered').
(Other telephones on the same line will
ring.)
If you program the machine properly, it will
recognize the registered ring pattern of the
'fax number' within 2 ring patterns and
then answer with a fax tone. When the
'voice number' is called, the machine will
not answer.
58

Registering the unique ring pattern

Very important!

7
After you have set the Unique Ring feature to
On, your Unique Ring number will receive
faxes automatically. The answer mode is
automatically set to Manual and you cannot
change it to another answer mode while
Unique Ring is set to On. This ensures the
Océ machine will only answer the Unique
Ring number and not interfere when your
main telephone number is called.
a
Press Menu, 2, 0, 2.
20.Miscellaneous
2.Unique Ring
Off
a
b Set
Select ab or OK
b
Press a or b to choose Set.
c
Press OK.
d
Press a or b to choose the prestored ring
pattern you want to use.
Press OK.
(You will hear each pattern as you scroll
through the four patterns. Make sure
you choose the pattern that the
telephone company gave you.)
e
Press Stop/Exit.
Unique Ring is now set to On.
7