Operations Of The Pc-Fax Rx Feature - Oce im7520 User Manual

Before Use
2.7.3

Operations of the PC-FAX RX feature

!
Detail
For details, see "PC-FaX RX Setting" (p. 11-48).
When setting the PC-FAX RX feature or TSI User Box Setting, documents
received are saved in the Memory RX User Box (Box No.0) or Public/Personal
User Box (Box No.1 to 999999999) in the hard disk.
The box into which documents received are saved is set in [PC-Fax RX
Setting] of the Utility Mode. For the relationship between [PC-Fax RX Setting]
and the reception method, see the table below.
[PC-Fax RX Setting] of the
Utility Mode
PC-Fax RX Setting: OFF
PC-Fax RX Setting: ON
RX Output: Memory RX
User Box
im7520/im6020
Reception method
Documents received are not saved in the box, but printed imme-
diately.
In the following cases, however, documents received are saved in
the box.
1. In the case of the Confidential RX or Relay Request RX
(When the sub-address in the F-code is representing a number
for the Confidential User Box or Relay User Box):
The reception documents are saved in the Confidential User Box
or Relay User Box regardless of the setting of the PC-FAX RX fea-
ture.
When the sub address is different from a number for each box, or
the password of the F code is different from a communication
password for each box, a communication error results.
2. When TSI User Box Setting is set to ON:
Documents received are stored in the box set by TSI User Box
Setting.
3. When the Memory RX is set to ON:
When not corresponding to 1. or 2. above, documents received
are saved in the Memory RX User Box.
Documents received are saved in the Memory RX User Box.
In the following cases, however, documents received are saved in
a different box.
1. In the case of the Confidential RX or Relay Request RX
(When the sub-address in the F-code is representing a number for
the Confidential User Box or Relay User Box):
Documents received are saved in the Confidential User Box re-
gardless of the setting of the PC-FAX RX feature. When the sub
address is different from a number for each box, or the password
of the F code is different from a communication password for
each box, a communication error results.
2
2-23