Sleep Timer; Turning Off The Scanner Lamp - Oce VL3200x User Manual

Sleep Timer

The Sleep Timer setting can reduce power
consumption by turning off the fuser while the
machine is idle.
You can choose how long the machine must
be idle before it goes into sleep mode. When
the machine receives a fax, computer data, or
makes a copy, the timer will be reset. The
default setting is 5 minutes.
When printing or copying in sleep mode,
there will be a short delay while the fuser
warms up.
a
Press Menu 1, 5, 2.
15.Ecology
2.Sleep Timer
005Min
Enter & OK Key
b
Enter the length of time the machine is
idle before entering sleep mode.
Press OK.
c
Press Stop/Exit.
Note
To turn off sleep mode, press
Secure/Direct and Job Cancel at the
same time in step b. Press a or b to
choose Off. Press OK.
Turning off the scanner
3
lamp
The scanner lamp stays on for 16 hours
before automatically switching off to preserve
the life of the lamp and reduce power
consumption.
To turn the scanner lamp off manually press
the d and c keys simultaneously. The scanner
lamp will remain turned off until the next time
you use the scanning feature.
Note
Turning the lamp off regularly will reduce
the lamp's life.
System Setup
3
3
29