For Wireless Network Interface Users; Before You Begin - Oce VL3200x Quick Setup Manual

For Wireless Network Users

For Wireless Network Interface Users

16

Before you begin

First you must configure the wireless network settings of your machine to communicate with your network access
point (router). After the machine is configured to communicate with your access point (router), computers on your
network will have access to the machine. To use the machine from these computers, you will need to install the
drivers and software. The following steps will guide you through the configuration and installation process.
Note
• To achieve optimum results with normal everyday document printing, place the Océ machine as close to
the network access point (router) as possible with minimal obstructions. Large objects and walls between
the two devices as well as interference from other electronic devices can affect the data transfer speed of
your documents.
• Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large graphics,
you may want to consider choosing wired Ethernet for a faster data transfer or USB for the fastest
throughput speed.
• Although the Océ VL3200x can be used in a both wired and wireless network, only one of the connection
methods can be used at a time.
• If you have previously configured the wireless settings of the machine you must reset the network (LAN)
settings before you can configure the wireless settings again.
On your machine, press Menu. Press 7.
Press 0 to choose Network Reset.
Press 1 twice for Yes to accept the change.
Note
The following instructions are for infrastructure mode.
To set up your machine in any other wireless environment you can find instructions in the Network User's
Guide.
You can view the Network User's Guide by following the instructions below.
1 Turn on your computer/Macintosh. Insert the Océ CD-ROM into your CD-ROM drive.
®
For Windows :
2 Choose the language. The CD-ROM main menu will appear.
3 Click Documentation.
For Macintosh:
2 Double-click Documentation, and then double-click your language folder.
28